Operations & Reporting, 8 min read

Quick lube bay time: how to measure car-in to car-out (and what a 20-minute target hides)

Quick lube bay time is the minutes from the moment a car's front wheels cross into the bay to the moment it leaves. To measure it properly, record five timestamps per car (arrival, car-in, hood up, ticket closed, car-out), because the ticket clock in your POS starts and stops when someone presses a button, not when the car moves. Then look at the average and the slowest 10% of cars, by bay, by shift and by store.

Most shops already have a bay time number. It usually comes from ticket open to ticket close, which is easy to pull and easy to game: open the ticket late, close it early, and every store hits its target. The customer's experience, and the shop's capacity, run on the real clock.

Quick answer

  • Bay time = car-out minus car-in, measured at the bay, not at the counter.
  • Track 5 timestamps: arrival on the lot, car-in, hood up, ticket closed, car-out.
  • Look at the slow tail, not just the average. The slowest 10% of cars is where the wait builds up.
  • Compare ticket time with real bay time. A big gap means tickets are opened late or closed early.
  • Report by bay, shift and store, plus idle bay minutes and revenue per bay minute.

What is a normal bay time for a quick lube?

There isn't one number, because shops don't measure it the same way. NOLN's 2025 operator survey asked operators for their average bay time and got this spread (NOLN):

Average bay time (self-reported)Share of operators
10 minutes or less11.7%
11 to 15 minutes36.4%
16 to 20 minutes29.9%
More than 20 minutes22.1%

The survey doesn't say whether that's car-in to car-out or ticket time, which is the point of this guide: two shops reporting "15 minutes" may be measuring different things.

What the customer feels is the total wait, including time in line. One quick lube operator NOLN profiled put the limit at roughly half an hour: if you can't keep cars under that wait, you have to change something (NOLN). Bay time is the part of that wait you control most directly.

Why isn't ticket time the same as bay time?

Because a ticket is paperwork and a bay is a place. Common ways they drift apart:

  • Ticket opened after the car is already in the bay. The greeting, the walk-around and the hood up happen off the clock.
  • Ticket closed before the car leaves. Payment, the final walk-around, or a car waiting for the customer to come back from next door.
  • Two cars, one ticket, or a ticket opened for a car that's still in line.
  • A car that never gets a ticket at all. Then it has no bay time on paper, and no revenue either. Our off-book oil change guide covers that case.

None of these show up if all you have is the POS. They show up when you put a second clock next to it.

Which timestamps should you record?

TimestampWhat it marksWhere it comes from
1. ArrivalCar joins the line or the lotEntrance or lot camera, or a greeter's tablet
2. Car-inFront wheels cross into the bayBay camera, or a manual log for a test week
3. Hood upWork actually startsBay camera, or tech taps a button
4. Ticket closedSale finalizedPOS
5. Car-outCar leaves the bayBay camera, or a manual log

From those five you get the numbers that matter:

  • Wait time = car-in − arrival
  • Time to first hood = hood up − car-in (slow starts are usually a staffing or handoff problem)
  • Bay time = car-out − car-in
  • Ticket gap = bay time − (ticket closed − ticket opened)
  • Idle bay minutes = open minutes with no car in the bay

If you don't have cameras in the bays, run a manual week: a clipboard at each bay, the lead tech writes down car-in and car-out to the minute. It's tedious, but one week per store is enough to see whether your ticket times are real.

A worked example: one store, one Saturday

Made-up numbers (made-up numbers, not real store data) for a 3-bay quick lube, Saturday 8am to 4pm:

BayCarsAverage bay timeSlowest 10% of carsAverage ticket timeIdle minutes
Bay 12215 min26 min13 min150
Bay 21917 min31 min12 min157
Bay 31224 min44 min14 min192
Store5318 min33 min13 min499

What it tells you:

  • On paper the store averages 13 minutes, inside a 15-minute target. On the real clock it averages 18.
  • Bay 3 is the problem. Its ticket time looks normal, but cars stay 10 minutes longer than the ticket says, and its slow tail runs to 44 minutes. Watch three or four of those clips before you guess why. Common reasons: it's the bay that gets the add-on services, or it's short a lower-bay tech.
  • The store had 499 idle bay minutes on a Saturday, about 8 bay-hours, while the lot camera showed cars waiting at 11am and 1pm. That's a scheduling problem, not a capacity one.

Revenue per bay minute is the number that ties it together: sales for the day divided by occupied bay minutes. If Bay 3 sells more per car because it gets the add-ons, its longer time may be fine. If it sells the same and takes longer, it's costing you cars.

What does a 20-minute target hide?

A single average hides three things:

  1. The slow tail. An 18-minute average with a 44-minute tail means some customers waited a long time, and those are the ones who don't come back. Track the slowest 10% of cars per bay per day.
  2. The ticket gap. If the target is measured on ticket time, stores learn to hit it on paper. Measure on car-in to car-out.
  3. The empty bay. A fast bay that sits idle half the morning while cars queue at the next one isn't efficient. Track idle bay minutes next to bay time.

There's also a quality side. A store that suddenly gets faster may be skipping steps: the walk-around, the drain plug check, the top-offs. Pair bay time with a short video audit of a few cars per week, so speed doesn't come at the cost of a comeback.

How do you compare bay time across stores?

Use the same definition at every store (car-in to car-out, from the same source), then compare:

  • Average and slowest 10% bay time, by store, weekday vs Saturday
  • Ticket gap by store (the store with the biggest gap is where tickets aren't reflecting reality)
  • Idle bay minutes during hours when cars were waiting
  • Revenue per bay minute

Put those next to car count and average ticket on the quick lube manager scorecard, and each manager sees where their store stands every week. For the rest of the quick lube numbers and how to calculate them, see our quick lube KPIs guide.

How Trilix fits

We turn the bay cameras you already have into the second clock. Each car gets car-in, hood up and car-out times from video, matched to its ticket in the POS, and the results land on one owner dashboard by bay, shift and store every morning: bay time, the slow tail, the ticket gap, idle bays and any car with no ticket. More on how it works on our quick lube camera analytics page and the camera analytics overview.

Want real bay times by bay and store?

We'll look at your cameras and your POS and show you what the numbers would look like at each location.

Before you sign anything, you’ll speak with businesses we already work with. No pitch deck, no pressure. If it’s not a fit, we’ll tell you.

FAQ

Something else on your mind? Ask us directly or call 416-262-2723.

How do you measure bay time at a quick lube?

Record when each car enters the bay and when it leaves, at the bay itself, using a bay camera or a manual log. Subtract car-in from car-out. Don't rely on ticket open and close times, which depend on when someone presses a button.

What is a good bay time for an oil change?

It depends on the menu, the number of techs per bay and what you count. In NOLN's 2025 operator survey, about 36% of operators reported 11 to 15 minutes and about 30% reported 16 to 20 minutes. Set your target from your own stores' measured car-in to car-out times, then watch the slow tail.

What is time to first hood?

The minutes between a car entering the bay and the hood going up. Long times to first hood usually point to a handoff problem: the lower-bay tech isn't ready, or the greeter is still writing up the car.

Why is my POS ticket time shorter than real bay time?

Usually because tickets are opened after the car is in the bay or closed before it leaves. Compare the two for a week. A consistent gap of a minute or two is normal; a big or growing gap at one store is worth a look.

Can cameras measure bay time automatically?

Yes. Most fixed bay cameras can show when a car enters and leaves a bay, and software can turn that into times per car and match them to POS tickets. Accuracy depends on camera angle and lighting, so check a sample of clips against the numbers in the first weeks.